Concord Camera 3040AF Manual De Usuario

6

GETTING STARTED

The Power Button is located on the top of the camera. (fig.1.1)
1. Press the (     ) Power Button to power the camera on.

• The LCD will turn on automatically.

2. To turn the camera off, press the (     ) Power Button. 

Note:
To extend battery life, the LCD will be off after 1 minute of inactivity, press (      ) button to reactivate the
LCD.  The camera will automatically power off after 2 minutes of inactivity, press the Shutter Button to
power the camera back on.

There are 5 battery levels that are displayed on the LCD.

Note: 
• The camera's battery level indicator may not accurately reflect the state of a rechargeable battery even

the chargeable batteries have been fully recharged due to the inherent problem with rechargeable
batteries.

• To extend battery life, the camera will automatically power off after 2 minutes of inactivity. To change this

setting please refer to p.27.

• For better performance, please use NiMH rechargeable batteries.
• Remove the batteries from the camera if they will not be used for an extended period of time to prevent

corrosion or battery leaks.

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

fig.1.1

Batteries are full

and ready to use.

3/4 battery

capacity remains.

1/2 battery

capacity remains.  

1/4 battery

capacity remains.

Batteries are low

need to be

replaced soon.

Batteries are

empty, blinking

red and need to

be replaced.

3040 UG(513438-01).qxd  2003:11:15  10:11 AM  Page 6