Clover Electronics Z670 Manual De Usuario

1.  Video Output/DC power Input (6 pin Din) 
 

This is a 6pin Din connector for outputting video signals and for DC 12V input from 
the system such as COM22168, LCD2088, TFT2284C, TFT2288C and LCD261616. 

 
 
 

 

2.  Video Output (BNC) 
 

This is a BNC connector for outputting video signals. 

 
 
 
 
 
 
3.  12V DC IN Jack 
 

When the 6pin Din connector ① is not connected, apply DC12V 500 mA 
regulated voltage to the DC IN Jack ③.  

 
4. Power 

LED 

 

It will be lit in green when the 6pin Din ① is connected or DC voltage is applied to 
the DC IN Jack. 

 
5.  Terminal Block for RS485 
 

This camera has a terminal block for 2 wires in polarity. 

 

Connect the provided twisted pair cable to this terminal block and the other end to the 
DVR system (refer to Chapter 5.0 Installation for more detail). 

 
6. Menu, 

Tele/Wide, 

Near/Far 

 

Refer to Section 4.1 On the zoom camera for more detailed information) 

 

 
 
 
 
 

 

-Press the Menu button on the rear of the camera and then the following Menu will    
display.  

 

 
 
 

Note: 
When the 6pin Din is connected, do not apply 12V DC to the DC IN Jack ③  
and connect the BNC video out ②. 

Note: 
When the BNC connector ② is used, do not connect the 6pin Din cable to the 
6pin Din jack①.