Casio EX-Z27 Manual De Usuario

Using the Camera with a Computer

Turn off the camera and
then use the USB cable
that comes with the
camera to connect it to
your Macintosh.

• Connecting the camera to

a computer with a USB
cable starts charging of
the camera’s battery
(page 18).

• Make sure that you insert

the cable connector into
the USB/AV port until you
feel it click securely into
place. Failure to insert the
connector fully can result
in poor communication or
malfunction.

• Note that even while the connector is fully inserted, you

still will be able to see the metal part of the connector as
shown in the illustration.

• When connecting the USB cable to a USB port, make

sure you align the connector correctly with the port.

• Your computer may not be able to recognize the camera

if you connect via a USB hub. Always connect directly to the computer’s USB
port.

Turn on the camera.

The camera’s back lamp will light green at this time. In this mode, your Macintosh
recognizes the memory card loaded in the camera (or the camera’s built-in
memory if it does not have a memory card loaded) as a drive. The appearance of
the drive icon depends on the Mac OS version you are using.

• The first time you connect the camera to your Macintosh with the USB cable,

an error message may appear on your computer. If this happens, disconnect
and then reconnect the USB cable.

• Charging continues even if the camera is turned on (page 20).

Double-click the camera’s drive icon.

Drag the “DCIM” folder to the folder to which you want to copy it.

USB port

USB cable

(included with camera)

Large connector

Small connector

Making sure that the mark on the USB cable
connector is towards the monitor screen side,
connect the cable to the camera.

[USB/AV]
port