Casio EX-ZR-410 Manual De Usuario

59

Snapshot Tutorial

You can use Focus Control to configure the camera so the background is blurred and 
only the foreground subject is in focus (Blurred Background), or so everything is in 
focus (All-In-Focus Macro).

This function analyzes a burst of consecutive images and then blurs the background 
behind the main subject. This creates an effect that really makes the subject stand 
out, just like photographs taken with a single-lens reflex camera. The blur effect can 
be set to one of three levels.

Align the mode dial with [E] (Focus Control).

Use [8] and [2] to select 

Use [4] and [6] to select “Blurred Background” and then press [SET].

Press [SET] and then use [8] and [2] to select the 

Use [4] and [6] to select the Image Blur level you want, and then press 
[SET].

• The Image Blur level can be set to Level 1, Level 2, or Level 3.

• Get as close as possible to the subject. Also, the background should be as far 

away as possible from the subject. The required distances depend on the 
zoom factor being used.

• This will cause the message “Busy... Please wait...” to appear. Do not move 

the camera while this message is displayed. The recording process takes 
some time to complete after the message appears.

Shot with “Program Auto”.

Shot with “Blurred Background”.

Example : When zoom is set to full wide (W), the distance between the camera 

and subject should be 30cm, while the distance between the subject 
and background should be at least 1 meter.