Casio EX - ZR1500 Manual De Usuario

114

Advanced Settings (REC MENU)

Enter the REC Mode * [MENU] * “r REC MENU” Tab * Anti Shake

You can turn on the camera’s Anti Shake feature to reduce image blur due to subject 
movement or camera movement when shooting a moving subject using telephoto, 
when shooting a fast-moving subject, or when shooting under dim lighting conditions.

• Only camera shake correction can be used during FHD and STD movie recording.
• Anti Shake correction is not supported during High Speed Movie, HDR Art Movie 

recording or Time Lapse.

• When Anti Shake is enabled and “Auto” is selected for “ISO” (page 53), ISO 

sensitivity, aperture, and shutter speed will not appear on the monitor screen when 
you half-press the shutter button. These values will appear in the display of the 
image immediately after it is shot.

• Shooting with Anti Shake enabled can cause an image to appear somewhat 

coarser than normal and can cause slight deterioration of image resolution.

• Anti Shake may not be able to eliminate the effects of camera or subject movement 

when movement is severe.

• Anti Shake may not work properly when the camera is mounted on a tripod. Turn 

off Anti Shake.

• Even if “Strong” is selected for the Anti Shake setting, some shooting conditions 

may make it impossible to achieve the desired Anti Shake results.

While applying hand shake correction, shutter speed 
faster than “Standard” also further reduces subject 
blur. Also, ISO sensitivity may be raised from 
“Standard”.
This setting can be used while the recording mode is 
Program Auto (except for High Speed CS), Premium 
Auto Pro or HS Anti Shake.

Dramatically reduces the effects of hand and subject 
movement.

None

Turns off Anti Shake settings.

Half-pressing the shutter button demonstrates the 
effect of Anti Shake. However, the image is not 
recorded. This setting can be used only when Program 
Auto is selected as the recording mode.