Barco matrixpro-II 12x8 Manual De Usuario

24 

          MatrixPRO- 

II

There are three differences between the input and output setup screens.  One is that on the input 
screen the user will be able to adjust the audio input trim.   The second difference between an RGB 
input and RGB output is the ability to enable or disable the RGB delay on the RGB output.  The 
third difference is the ability to enable and set sync equalization.  Below is a screen for output 1. 
The method of setting the output type works exactly the same as the input type setup except that the 
message changes from input to output. The user can either choose an output directly using one of the 
output buttons or use the UP, DOWN, and SELECT buttons to choose the output. 

OUTPUT SETUP

OUTPUT NUMBER

>

VIDEO TYPE

RGB DELAY

SYNC EQU

CABLE LENGTH

01

NATIVE

OFF

OFF

0

SAVE

RGB DELAY is used so that the display can sync up to the new sources' sync signals before 
switching in the new source video. RGB DELAY is only for the RGB matrix and can be set as ON or 
OFF (will not appear on the display when in  split mode or on non-RGB models). 

SYNC EQU is a feature designed to restore sync rise and fall time to compensate for losses in sync 
levels over long cable runs.  There are three settings:  OFF, ON, or AUTO.  When set to AUTO, sync 
equalization will automatically turn on when CABLE LENGTH setting is set to 50' or more (will not 
appear on the display when in  split mode or on non-RGB models)

CABLE LENGTH gives the user the ability to compensate for the length of cable from the 
MatrixPRO-II to the display.  The settings are from 0 to 150 feet in increments of 10 feet.  Zero feet 
is off.  The user presses the up and down buttons to select the length and presses the SELECT button.