Fujitsu C150-E049-02EN Manual De Usuario
M3099GX/GH OEM Manual
8-5
CLEANING
Cleaning the rollers
Cleaning the rollers with Cleaning Sheet:
1 Set the hopper table guides
to the B4 width.
2 Remove protective paper
from the cleaning sheet.
With the adhesive side up,
place the cleaning sheet on
the hopper table by aligning
it with the left guide.
With the adhesive side up,
place the cleaning sheet on
the hopper table by aligning
it with the left guide.
3 Press [MODE2] twice,
[MODE1] once, then
[START]. (The hopper
table goes up and the
cleaning sheet is
transported.)
[START]. (The hopper
table goes up and the
cleaning sheet is
transported.)
4 By aligning with the right
guide, place the same
cleaning sheet on the
hopper table with the
adhesive side up.
cleaning sheet on the
hopper table with the
adhesive side up.
5 Transport the cleaning
sheet by the switch
operations of 3 .
operations of 3 .
6 Place a new cleaning sheet
on the hopper table with
the adhesive side down, and
repeat steps 2 to 5 .
the adhesive side down, and
repeat steps 2 to 5 .
“B4”
Lock
lever
lever
Guide
Hopper table
FRONT
Hopper table
Right
guide
guide
Left guide