Fujitsu C150-E049-02EN Manual De Usuario

38 At Screen 27, the Product-ID may be

M3099G, M3099GH or M3096G at each
time you press [Mode 1] in case of
M3099GH, and M3099G or M3096G at
each time you press [Mode 1] in case of
M3099GX.

39 Press [Mode 2] to see Screen 26. The setting

are stored to EEPROM.

40 When you close the setup mode, go to  9 .

When you set the picking start time, you must set as follows.

41 At Screen 2, press [Mode 1] fourteen times to

go to the PICK START TIME screen.
(Screen 28)

42 Press [Mode 2] to see Screen 29. (The default

setting is 1 sec.)

43 At Screen 29, press [Mode 1] until the digit

you want to change blinks. Then press [Mode
2] until the digit changes as you want. (The
specifiable range is from 0.2 to 29.8 sec. in
0.2 sec. step.)

44 Press [Mode 1] and [Mode 2] at a time to see

Screen 28. The settings are stored to
EEPROM.

45 When you close the setup mode, go to  9 .

<< SETUP MODE >>

PICK START TIMER

PICK START TIMER

X X . X

S

Screen 29

Screen 28