Fujitsu C150-E049-02EN Manual De Usuario
3-32
M3099GX/GH OEM Manual
A reservation may only be released by the initiator that made it. It is
not an error to attempt to release reservation that is currently valid or
is held by another initiator. In this case, the target shall return
GOOD status without altering any other reservation.
not an error to attempt to release reservation that is currently valid or
is held by another initiator. In this case, the target shall return
GOOD status without altering any other reservation.
3rdPty:
0b (Reserved)
Third Party Device ID: 000b (Reserved)
TEST UNIT READY Command
The TEST UNIT READY command (Table 3.10) provides a means
to check if the logical unit is ready. This is not a request for a selftest.
If the logical unit would accept an appropriate command without
returning CHECK CONDITION status, this command shall return
a GOOD status. If the logical unit cannot become operational the
target shall return CHECK CONDITION status with a sense key of
NOT READY.
to check if the logical unit is ready. This is not a request for a selftest.
If the logical unit would accept an appropriate command without
returning CHECK CONDITION status, this command shall return
a GOOD status. If the logical unit cannot become operational the
target shall return CHECK CONDITION status with a sense key of
NOT READY.
Table 3.10 TEST UNIT READY Command
Bit
Byte
0
1
2
3
4
5
7
6
5
3
2
1
0
Operation Code (00h)
Reserved
Reserved
Reserved
Control
Logical Unit Number
Reserved
4
INQUIRY Command (See ANSI SCSI-2 7.2.5)
The INQUIRY command (Table 3.11) requests that information
regarding parameters of the target and its attached peripheral
device(s) be sent to the initiator. An option allows the inititor to
request additional information about the target or logical unit (See
ANSI SCSI-2 7.2.5.2 Vital Product Data).
regarding parameters of the target and its attached peripheral
device(s) be sent to the initiator. An option allows the inititor to
request additional information about the target or logical unit (See
ANSI SCSI-2 7.2.5.2 Vital Product Data).
#03.pm5
98.2.22, 1:31 PM
32