Fujitsu C150-E049-02EN Manual De Usuario
M3099GX/GH OEM Manual
3-37
INTERFACE
Product Identification: (M3099GH)
“M3099GHdm
”
default (Duplex, CMP2 equivalent)
“M3099GHdem
”
with ENDORSER option
“M3099GHdim
”
with IPC2 option
“M3099GHdeim
”
with ENDORSER, IPC2 options
Product Identification: (M3099GX)
“M3099Gdm
”
default (Duplex, CMP2 equivalent)
“M3099Gdem
”
with ENDORSER option
“M3099Gdim
”
with IPC2 option
“M3099Gdeim
”
with ENDORSER, IPC2 options
Product Identification: (M3096G)
“M3096Gm
”
default
“M3096Gim
”
with IPC2 option
Product Revision Level:
“01 ”(Black and White Binary)
Vital Product Data
JBMS(Japanese Business Machines Standard) is defining standard
Vital Product Data. (See JBMS-40-1990) Fujitsu Scanners also
support this data by adding Fujitsu original extention. JBMS-40-
1990 uses 30 Bytes as standard VPD to describe specification and
functions.This data is obtained by setting EVPD bit to 1 and Page
Code to F0h in INQUIRY command.
Vital Product Data. (See JBMS-40-1990) Fujitsu Scanners also
support this data by adding Fujitsu original extention. JBMS-40-
1990 uses 30 Bytes as standard VPD to describe specification and
functions.This data is obtained by setting EVPD bit to 1 and Page
Code to F0h in INQUIRY command.
If Product Identification has changed to M3096G or M3099G in
Off-line SETUP mode following data are returned. The ‘d’ which
indicates Duplex, and ‘e’ which indicates ENDORSER are not
returned. See Chapter 4 Operator panel.
Off-line SETUP mode following data are returned. The ‘d’ which
indicates Duplex, and ‘e’ which indicates ENDORSER are not
returned. See Chapter 4 Operator panel.
#03.pm5
98.2.22, 1:32 PM
37