Fujitsu fi-486PRFR Manual De Usuario

4.5 Replacing the Brake Roller Unit

REPLA

EMENT OF CONSUMABLES

5. Pull the Brake roller toward you to remove it.

6. Attach a new Brake roller unit in the reverse order of its removal. Attach the roller

unit until it locks in.

7. Install the Guide plate in the reverse order of the removal. You should push it down

then the installation can be done smoothly.

8. Lower the ADF upper sheet guide slowly.

9. Lift the Upper transport unit a little to release the safety lock and then lower the

transport unit slowly.

10. Clear the Brake roller counter.

Please refer to the section “7.3 Setup Mode Details”, “9. Abrasion counter reset.”

Brake roller