Fujitsu FI-6130Z Manual De Usuario
Appendix
192
*3: Up to 1.25 mm is supported for scanning at 200 dpi (60 ppm) in landscape when using fi-6140Z/fi-6240Z. This setting can be changed in the Software
Operation Panel to scan plastic cards with a thickness up to 1.4 mm.
For details, refer to
For details, refer to
*4: The paper weight only applies to using the ADF. There is no limitation when using the flatbed.
*5: Note that this is the hardware limitation, and the software's processing time such as data transfer time is added to the actual time of scanning.
*6: The capacity varies depending on the paper weight. See
*5: Note that this is the hardware limitation, and the software's processing time such as data transfer time is added to the actual time of scanning.
*6: The capacity varies depending on the paper weight. See
for details.
*7: USB 2.0/1.1 and Ultra SCSI interfaces cannot be used at the same time.
*8: You cannot connect multiple computers to the scanner using both types of interface cables at the same time.
*9: Connection with USB 2.0 requires the USB port and the hub to support USB 2.0. Also note that the scanning speed slows down when using USB 1.1.
*8: You cannot connect multiple computers to the scanner using both types of interface cables at the same time.
*9: Connection with USB 2.0 requires the USB port and the hub to support USB 2.0. Also note that the scanning speed slows down when using USB 1.1.