Kodak 300 Manual De Usuario
8
www.kodak.com/go/support
2
Printing from a PictBridge
compatible camera
compatible camera
The Kodak EasyShare photo printer 300 offers PictBridge compatibility, which lets you
print from your Kodak EasyShare digital camera or any PictBridge compatible camera
or device.
print from your Kodak EasyShare digital camera or any PictBridge compatible camera
or device.
1 Take pictures with your camera (see your camera user’s guide).
2 Connect your PictBridge compatible camera to the
photo printer using the USB cable for your camera.
Plug one end of the cable into the camera and the
other into the USB device connector located on the
side of the photo printer.
Plug one end of the cable into the camera and the
other into the USB device connector located on the
side of the photo printer.
NOTE: If the PictBridge compatible camera is already plugged in but
the connection is no longer available, disconnect then
reconnect the USB cable to re-establish the connection.
reconnect the USB cable to re-establish the connection.
3 Use your digital camera to review pictures, choose
printing options, and print. See your camera user’s
guide for details.
guide for details.
The On/Off button blinks while printing. The paper
cycles four times during the printing process before the
finished print is ejected. The first three passes apply
layers of yellow, magenta, and cyan colors to the print,
and the fourth pass applies the Kodak XtraLife
cycles four times during the printing process before the
finished print is ejected. The first three passes apply
layers of yellow, magenta, and cyan colors to the print,
and the fourth pass applies the Kodak XtraLife
TM
coating that protects and preserves the image.
IMPORTANT: Wait until printing is complete before removing paper, the paper tray, or the
camera. Failure to do so can cause paper misfeeds or jams.