Viewsonic VS13808 Manual De Usuario

4

3DPF8

In the Photo Frame back, pull the stand out of the slot.
After a “stuck” sound, lift the stand by turning 45°. Then 

the installation is complete.

Before you can use the picture frame, it has to be 

connected to the power supply. Plug the connection 

cable  of the power adapter into the respective plug of 

the picture frame and plug the power adapter into a wall 

outlet .

To power on the photo frame, please press the 

Power button 

longer than 3 seconds. To power off the photo frame, please press 

the 

Power button again.

The green indicator light will light up and the device will show the 

ViewSonic screen. 
Again press the 

Power power button on the side of Photo Frame, or press 

on the remote control. The indicator light will turn off.
[Note] The Power key on remote controller can switch the set between On 

and Standby mode only when the Photo frame is activated by the Power 

button at the side of frame.

Push the memory card (not included) gently into the 

respective card slot until it stops. When inserting a SD/

SDHC/MMC card, make sure that the contacts show to the 

back. You can also insert USB drive into USB slot instead.