Panasonic AJ-P2C004HG Manual De Usuario
145
Connection with external device: Connection with external devices using the USB 2.0 port
Con
nec
tio
tio
n wi
th e
xte
th e
xte
rnal
de
vi
de
vi
ce
8. MODEL
This section indicates the model of the P2 card that
originally contained data on the partition.
originally contained data on the partition.
Note
Press the cursor button (Z) to switch to the PARTITION
NAME. Press the [Y] button to return to the original
model name display.
NAME. Press the [Y] button to return to the original
model name display.
Enter the PARTITION NAME from the soft keyboard by
selecting CHANGE PARTITION NAME in the
OPERATION menu while the thumbnail of the hard disk
drive is displayed. (Max. 20 characters)
selecting CHANGE PARTITION NAME in the
OPERATION menu while the thumbnail of the hard disk
drive is displayed. (Max. 20 characters)
9. DATE/TIME
This section indicates the date and time the data on the
partition was recorded.
partition was recorded.
10. SERIAL
This section indicates the serial number of the P2 card
that originally contained the data on the partition.
that originally contained the data on the partition.
11. VERIFY
This section indicates the verification setting and results
at the time the data on the partition was recorded.
at the time the data on the partition was recorded.
ON/FINISHED:
Verification was performed and the results agreed.
ON/FAILED:
Verification was performed and the results did not
agree.
OFF:
No verification was performed.
- - -:
No verification information is available.
Verification was performed and the results agreed.
ON/FAILED:
Verification was performed and the results did not
agree.
OFF:
No verification was performed.
- - -:
No verification information is available.
Notes
Even for a FAT-type hard disk drive, the 1001st or
later clips are not shown.
For a FAT-formatted hard disk drive, the information
about only the first partition is shown.
For a P2 STORE (AJ-PCS060G) that has an invalid
partition, that partition information is shown in gray.
later clips are not shown.
For a FAT-formatted hard disk drive, the information
about only the first partition is shown.
For a P2 STORE (AJ-PCS060G) that has an invalid
partition, that partition information is shown in gray.
12. NAME
This section indicates the PARTITION NAME.
1
Switch the mode to USB HOST.
For more information, see [Switching to the USB HOST
mode] (page 143).
For more information, see [Switching to the USB HOST
mode] (page 143).
2
Connect the hard disk drive via USB.
3
Press the THUMBNAIL button to display the thumbnail
screen.
screen.
4
Press the THUMBNAIL MENU button and select HDD
EXPLORE from the thumbnail menu. The display
provides a screen that shows the information about the
hard disk drive.
EXPLORE from the thumbnail menu. The display
provides a screen that shows the information about the
hard disk drive.
5
From the menu, select OPERATION FORMAT (HDD)
and select YES using the cursor buttons and SET
button. Then, the confirmation message is displayed
again. Select YES.
and select YES using the cursor buttons and SET
button. Then, the confirmation message is displayed
again. Select YES.
6
The unit starts formatting the hard disk drive. Once
formatted, the hard disk drive can be treated as a
TYPE S HDD.
formatted, the hard disk drive can be treated as a
TYPE S HDD.
Note
Formatting a hard disk drive erases all contents of it.
Note that you cannot erase the contents of certain
partitions by specifying them.
Note that you cannot erase the contents of certain
partitions by specifying them.
Formatting a hard disk drive
AJ-HPX2700G-VQT1V27_eng.book 145 ページ ２００８年９月２日 火曜日 午後５時４３分