Panasonic AJ-P2C004HG Manual De Usuario
92
Adjustments and Settings for Recording: Handling data
6
Turn the jog dial button until a desired character
appears.
The characters that appear are switched in the following
order:
appears.
The characters that appear are switched in the following
order:
7
Press the jog dial button to accept a desired character.
8
Turn the jog dial button to move the arrow (cursor) to the
next digit (clockwise), and repeat steps 6 - 7 to set
characters (up to 8 characters).
next digit (clockwise), and repeat steps 6 - 7 to set
characters (up to 8 characters).
9
When the title is set, turn the jog dial button to move the
arrow (cursor) to : .
arrow (cursor) to : .
10
Press the jog dial button to return the arrow (cursor) to
the option TITLE.
the option TITLE.
11
Turn the jog dial button to move the arrow (cursor) to the
option WRITE.
option WRITE.
12
Press the jog dial button to display the following
message:
message:
The data will not be written if any of the following messages
appears when the jog dial button is pressed:
appears when the jog dial button is pressed:
13
Turn the jog dial button to move the arrow (cursor) to
YES. Then, press the dial button.
When the data has been written, the following message
appears:
YES. Then, press the dial button.
When the data has been written, the following message
appears:
14
To exit the menu, press the MENU button.
The settings menu disappears and the status of the unit
is indicated at the top and bottom of the viewfinder
screen.
The settings menu disappears and the status of the unit
is indicated at the top and bottom of the viewfinder
screen.
Notes
The <SD CARD R/W SELECT> screen can be used to
select the type of the menu to be written on the SD
memory card.
It is possible to overwrite a setup file stored by a different
device with a new setup file from this unit. Note that if the
file is overwritten, the original setup file from the other
device will be lost.
We recommend managing the respective SD memory
cards on the respective devices independently.
select the type of the menu to be written on the SD
memory card.
It is possible to overwrite a setup file stored by a different
device with a new setup file from this unit. Note that if the
file is overwritten, the original setup file from the other
device will be lost.
We recommend managing the respective SD memory
cards on the respective devices independently.
Space:
Ð
Alphabetical characters:
A to Z
Ð
Numerals:
0 to 9
Ð
Symbols:
', >, <, /, -
To write data on a selected file
Error message
Remedy
WRITE NG
NO CARD
(No SD memory card inserted.)
NO CARD
(No SD memory card inserted.)
Insert an SD memory card.
WRITE NG
FORMAT ERROR
(SD memory card not properly
formatted.)
FORMAT ERROR
(SD memory card not properly
formatted.)
The card has not been
formatted using the unit.
Replace the card.
formatted using the unit.
Replace the card.
WRITE NG
ERROR
(SD memory card not writable.)
ERROR
(SD memory card not writable.)
The card may be defective.
Replace the card.
Replace the card.
WRITE NG
WRITE PROTECT
(SD memory card write-
protected.)
WRITE PROTECT
(SD memory card write-
protected.)
Remove the card and disable
the protect.
the protect.
WRITE NG
CANNOT ACCESS
(SD memory card not
accessible.)
CANNOT ACCESS
(SD memory card not
accessible.)
It is impossible to access the SD
memory card while the card is in
use. After completion of the
respective operations, perform
the write operation again.
memory card while the card is in
use. After completion of the
respective operations, perform
the write operation again.
WRITE NG
CARD FULL
(SD memory card has no free
space.)
CARD FULL
(SD memory card has no free
space.)
The card is not writable because
it has no free space. Delete
unwanted files or replace the
card with a new one.
it has no free space. Delete
unwanted files or replace the
card with a new one.
AJ-HPX2700G-VQT1V27_eng.book 92 ページ ２００８年９月２日 火曜日 午後５時４３分