JVC GY-HM700CHU Manual De Usuario

To output live or playback video images and audio sound to 
an external monitor, select the output signals from the 
camera recorder, and connect using an appropriate cable 
according to the monitor to be used.

Either component or composite signals can be output from 
the BNC terminals on the terminal area of the camera 
recorder.
Connect the external monitor to the [Y/VIDEO] output 
terminal for composite signals, or to [Y/VIDEO], [PB], and 
[PR] video signal output terminals for component signals.

* Select the output signal using [Output Terminal] in the [A/V 

Out] menu. (

* To display menu screens or status screens on the external 

monitor, set [Analog Out Char.] in the [A/V Out] menu to 
AOnB. (A Page 86)

䡵Settings for Composite Output

You can select the method to 

Adown convertB HD video 

images to SD images during composite output.
Set using [Down Convert] in the [A/V Out] menu.
The available modes include 

ASide CutB, ALetter BoxB 

(blackened at the top and bottom), and 

ASqueezeB (full size, 

compressed at the left and right). (

Setup signals can be added to the output video signals 
during composite output.

* You can select whether to add setup signals using [Set Up] 

in the [A/V Out] menu. (

Either HD-SDI or SD-SDI signals can be output from the 
[HD/SD-SDI] terminal (BNC) on the terminal area of the 
camera recorder.

● Digital audio signals, together with embedded 

(superimposed) audio signals and time code signals, are 
output for both the HD-SDI and SD-SDI signals.

● User’s bit output from the [HD/SD-SDI] output terminal is 

used as a flag to determine valid video signals. Therefore, 
accurate values will not be output.

● The sampling frequency for embedded (superimposed) 

audio signals is 48 kHz. Time code of the built-in time 

generator as well as playback time code are also output.

* Select the output signal using [HD/SD-SDI Out] in the [A/V 

Out] menu. (

* To display menu screens or status screens on the external 

monitor, set [SDI Out Char.] in the [A/V Out] menu to 

AOnB. 

䡵Settings for SDI Output

You can select the method to 

Adown convertB HD video 

images to SD images during SD-SDI output.
Set using [Down Convert] in the [A/V Out] menu.
The available modes include 

ASide CutB, ALetter BoxB 

(blackened at the top and bottom), and 

ASqueezeB (full size, 

compressed at the left and right). (

COMPONENT IN

VIDEO IN

[AUDIO OUTPUT]

AUDIO IN

[Y/VIDEO]

[Y/VIDEO], [PB], [PR]

Component Output

Composite Output

SDI IN

[HD/SD-SDI]