Hitachi JU-1000 Manual De Usuario
- 23 -
*** basic parameters
Hardware: Ethernet TPI
IP addr 192.168.0.21, no gateway set,netmask 255.255.255.0
*** Security
SNMP is enabled
Change Setup:
0 Server
1 Channel 1
3 E-mail
5 Expert
6 Security
7 Defaults
8 Exit without save
9 Save and exit Your choice ?
9) Reset the IP address
Select the “0” Server, and reset IP address following the direction on the screen.
NOTICE:
The Netmask setting specifies the bit length used for the host addressing.
Example:
When the netmask setting is 255.0.0.0, the host addressing uses 24 bits.
When the netmask setting is 255.255.0.0, the host addressing uses 16 bits.
When the netmask setting is 255.255.255.0, the host addressing uses 8 bits.
NOTICE:
Never change the password for telnet.
Controlling this password is your responsibility.