Ricoh GR Digital III Manual De Usuario
168
T
ECHNIC
AL
N
OT
ES
Other Flash Units
Use only flash units with one signal terminal, which must
be an X-contact with a positive voltage of no more than
20 V. Use a flash that covers the angle of view of the lens.
Use only flash units with one signal terminal, which must
be an X-contact with a positive voltage of no more than
20 V. Use a flash that covers the angle of view of the lens.
1
Close the flash cover (page 25).
2
Attach the flash.
Turn the camera and the optional flash unit off and
attach the flash to the camera hot shoe.
attach the flash to the camera hot shoe.
3
Set aperture manually.
Turn the camera on, select mode A or M, and choose
an aperture (pages 14, 43, 44).
an aperture (pages 14, 43, 44).
4
Choose a manual ISO sensitivity setting.
Select an option other than Auto for ISO sensitivity
(page 84).
(page 84).
5
Turn the flash on.
Turn the flash on and set it to auto mode. Set aper-
ture and ISO sensitivity to the values selected with
the camera. Take a test shot and adjust flash aper-
ture and ISO settings as necessary.
ture and ISO sensitivity to the values selected with
the camera. Take a test shot and adjust flash aper-
ture and ISO settings as necessary.
Turn the optional flash unit off before removing it from
the camera.
the camera.
Cautions
• If the external flash is on, it will fire with every shot regardless to
the flash mode selected with the camera. Turn the flash unit off
to shoot without the flash.
to shoot without the flash.
• Optional flash units are in principle for use at ranges that exceed
the range of the built-in flash. Using an optional flash unit at
shorter ranges may result in overexposure.
shorter ranges may result in overexposure.