Panasonic PVGS90P Manual De Usuario
Others
45
LSQT1284
2: The remaining tape time indication
disappears.
• The remaining tape time indication may
disappear temporarily during frame-by-frame
playback or other operation. If you continue
ordinary recording or playback, the indication is
restored.
playback or other operation. If you continue
ordinary recording or playback, the indication is
restored.
3: The remaining tape time Indication does not
match the actual remaining tape time.
• If scenes of less than 15 seconds are
continuously recorded, the remaining tape time
cannot be correctly displayed.
cannot be correctly displayed.
• In some cases, the remaining tape time
indication may show remaining tape time that is
2 to 3 minutes shorter than the actual
remaining tape time.
2 to 3 minutes shorter than the actual
remaining tape time.
4: The function indications such as the mode
indication or the remaining tape time
indication are not shown.
indication are not shown.
• If you set [SETUP] >> [DISPLAY] >> [OFF], all
indications other than the tape running
condition, warning, and date are not displayed.
condition, warning, and date are not displayed.
Playback (Sound)
1: Sound is not played back from the built-in
1: Sound is not played back from the built-in
speaker of the Camcorder.
0 Is the volume too low? During playback, push
the [
sVOLr] lever to display the volume
indication and adjust it. (
-35-
)
2: Different sounds are reproduced at the
same time.
• Have you set [SETUP] >> [AUDIO OUT] >>
[STEREO] and reproduced a picture containing
the main sound and sub sound? Set to [L] to
hear main sound, and set to [R] to hear the sub
sound. (
the main sound and sub sound? Set to [L] to
hear main sound, and set to [R] to hear the sub
sound. (
-41-
)
Playback (Pictures)
1: Although the Camcorder is correctly connected
1: Although the Camcorder is correctly connected
to a TV, playback images cannot be seen.
The playback images are vertical.
The playback images are vertical.
• Have you selected video input on the TV?
Please read the operating instructions of your
TV and select the channel that matches the
input terminals used for the connection.
TV and select the channel that matches the
input terminals used for the connection.
• Is the [TV ASPECT] setting correct? Change
the setting to match the aspect ratio of the TV.
[SETUP] >> [TV ASPECT] >> [16:9] or [4:3].
[SETUP] >> [TV ASPECT] >> [16:9] or [4:3].
2: Mosaic-pattern noise appears on images
during cue or review playback.
• This phenomenon is characteristic of digital
video systems. It is not a malfunction.
3: Horizontal stripes appear on images during
cue and review playback.
• Horizontal stripes may appear depending on
the scene, but this is not a malfunction.
4: Playback picture is not clear.
• Are the heads of the Camcorder dirty? If the
• Are the heads of the Camcorder dirty? If the
heads are dirty, playback image cannot be
clear. Clean the heads by using the head
cleaner for digital video (optional). (
clear. Clean the heads by using the head
cleaner for digital video (optional). (
-46-
)
• If the terminal for the AV cable is soiled, noises
may appear on the screen. Wipe the soil off the
terminal with a soft cloth, and then connect the
cable to the A/V terminal.
terminal with a soft cloth, and then connect the
cable to the A/V terminal.
• Is a picture containing a copyright protection
signal (copy guard) being recorded? When a
protected picture is played back by the
Camcorder, mosaic-like patterns appear on the
picture.
protected picture is played back by the
Camcorder, mosaic-like patterns appear on the
picture.
Others
1: The indication disappears, the screen is
1: The indication disappears, the screen is
frozen, or no operation can be performed.
• Turn off the power to the Camcorder. If the
power cannot be turned off, press the [RESET]
button, or detach the battery or AC adaptor and
then reattach it. Turn on the power again. If
normal operation is still not restored, detach the
power connected, and contact Panasonic. (
button, or detach the battery or AC adaptor and
then reattach it. Turn on the power again. If
normal operation is still not restored, detach the
power connected, and contact Panasonic. (
-55-
)
2: “PUSH THE RESET SWITCH” is displayed.
• An irregularity in the Camcorder has been
• An irregularity in the Camcorder has been
automatically detected. Remove the cassette
for data protection and then press the [RESET]
button with the boss
for data protection and then press the [RESET]
button with the boss
A. The Camcorder will be
activated.
• If you do not press the [RESET] button, the
power to the Camcorder is turned off
automatically about 1 minute later.
automatically about 1 minute later.
• Even after you press the [RESET] button, the
indication may still appear repeatedly. If so, the
Camcorder needs repair. Detach the power
connected, and contact Panasonic. (
Camcorder needs repair. Detach the power
connected, and contact Panasonic. (
-55-
)
A
RESET
PV-GS90P_LSQT1284_Eng.book 45 ページ ２００７年１１月２８日 水曜日 午前９時２０分