Panasonic AJ-HPX3100G Manual De Usuario
157
Maintenance and Inspections: Warning System
Mai
n
ten
ance an
ance an
d Insp
ecti
o
o
n
s
HDD
(USB HOST
MODE)
(USB HOST
MODE)
CANNOT ACCESS
CARD!
CARD!
An error occurred during P2 card access.
Check P2 card.
CANNOT ACCESS
TARGET!
TARGET!
An error occurred during hard disk access.
Check hard disk status and connection.
CANNOT FORMAT!
The hard disk cannot be initialized.
Connect another hard disk drive.
CANNOT
RECOGNIZE
HDD!
RECOGNIZE
HDD!
The destination target cannot be properly
recognized.
recognized.
Reboot the hard disk or connect a different hard
disk.
disk.
CARD IS EMPTY!
CANNOT COPY!
CANNOT COPY!
The P2 selected for copying is empty.
Copying is not performed since the card is empty.
FORMAT P2 CARD!
This warning indicates that data could not be
imported from a hard disk to a P2 card
because the P2 card contained recorded data.
imported from a hard disk to a P2 card
because the P2 card contained recorded data.
You cannot copy to a P2 card that contains data.
Format the card on a P2 device and copy again.
Format the card on a P2 device and copy again.
HDD CAPACITY
FULL!
FULL!
Not enough space left on the hard disk.
There is not enough space on the connected hard
disk. Use a new hard disk or formatted hard disk.
disk. Use a new hard disk or formatted hard disk.
HDD
DISCONNECTED!
DISCONNECTED!
The unit is not connected to a hard disk.
Reconnect the USB cable. If the hard disk does not
operate normally, turn it off and turn it back on
again.
operate normally, turn it off and turn it back on
again.
MISMATCH
COMPONENT!
COMPONENT!
Copying is not possible since the model
number of the destination card does not match
that of the source card.
number of the destination card does not match
that of the source card.
Use a P2 card with the same model number or
import video in clip units.
import video in clip units.
TOO MANY
PARTITIONS!
PARTITIONS!
There are too many partitions.
Hard disks can handle up to 23 partitions. Use a
new hard disk or formatted hard disk.
new hard disk or formatted hard disk.
TOO MANY
TARGETS!
TARGETS!
Multiple devices are connected.
Disconnect devices, turn off the unit and turn it back
on again.
on again.
UNKNOWN DEVICE
CONNECTED!
CONNECTED!
The connected DVD drive is not compatible.
Disconnect devices, turn off the unit and turn it back
on again.
on again.
VERIFICATION
FAILED!
FAILED!
The compare check after copying failed.
Copy the data again.
Item
Message
Description
Measure
AJ-HPX3100G(VQT3A79)_E.book 157 ページ ２０１０年９月１７日 金曜日 午後９時２１分