Panasonic PV-GS50-K Manual De Usuario

≥The [CAMERA] Lamp lights up. 

1

≥Recording starts.
≥After the [RECORD] indicator is displayed, it changes to 

[REC]. 

2

≥The Rec Lamp (LED Lamp) 

3

 lights up during recording and 

alerts those being recorded that recording is in progress. The 
Rec Lamp does not light up if the [REC LAMP] on the 
[OTHER FUNCTIONS1] Sub-menu is set to [OFF].

≥[PAUSE] is displayed. 

4

≥If the Recording Pause Mode continues for more than 

5 minutes, the power is turned off automatically for tape 
protection and power conservation. To resume recording from 
this condition, turn on the power again.

≥When recording while the Mode Selector Switch is set to [AUTO] 

5

, the Palmcorder automatically adjusts the focus and white 

balance. (In some cases, they cannot be adjusted automatically 
and need to be adjusted manually.) (

l 37)

≥Before turning on the power, remove the Lens Cap. If the Lens 

l 37)

ª To Check the Recording

By pressing the [

S] Button 

6

 in the Recording Pause Mode, you 

can play back the last few seconds of the recorded scene.
≥[CHK]

 

is displayed. After checking, the Palmcorder resumes the 

Recording Pause Mode.

≥For other notes, see page 84.

ª To View the recorded scene while the Recording 

The recorded scene can be viewed by holding down the 
[SEARCH

j] Button 

6

 or [SEARCH

i] Button 

7

 in the Recording 

Pause Mode.
The Camera Search Function is useful for finding the starting point 
of a new scene to create a smooth transition from one scene to 
another.
≥When the [SEARCHj] Button is pressed, images are played back 

in the reverse direction.

≥When the [SEARCHi] Button is pressed, images are played back 

in the forward direction.

≥For other notes, see page 85.

ª To Finish the Recording

Set the [OFF/ON/MODE] Switch to [OFF].

2

4

1

5

AUTO

MANUAL
FOCUS

O

FF

ON

MODE

CAMERA

VCR

TAPE

CARD

CARD

MODE

3

SEARCH

SEARCH

6

7

CARD
PB

PV-GS50P.book  28 ページ  ２００３年２月１７日　月曜日　午後６時３０分