Panasonic HDC-HS900 Manual De Usuario

≥ After adjustment, a single screen appears.
≥ When re-attaching the 3D Conversion Lens or 

≥ Start recording after removing the Lens front cap.
≥ When the 3D Conversion Lens is attached, the zoom position is fixed, and the zoom 

operation is disabled.

≥ When recording in 3D, the image will appear with grey frame around it. The grey frame will 

be recorded in the video.

≥ Use of a tripod is recommended for recording with a stable picture.
≥ The reception range for the remote control might become narrow at the upper side of the 

unit, so operate from the lower side. (l 45)

≥ [ECONOMY] will not work while you adjust the 3D Conversion Lens attachment position.
≥ When the 3D Conversion Lens is attached, the auto slow shutter setting is [AUTO SLOW 

SHTR (3D)]. The default setting of [AUTO SLOW SHTR (3D)] is [ON]. (l 65)

≥ While 3D recording if moving the unit fast, the message is more likely to appear.
≥ If the unit is turned on with the lens cap attached in the shade etc., the screen may appear 

to be blue. In such a case, remove the lens cap to return the screen to normal.

To ensure that the 3D video can be safely viewed, pay attention to the following 
points when recording.
≥ Where possible, record with the unit in a horizontal state.
≥ Do not get too close to the subject. (record from a distance of at least 1.2 m.)
≥ When moving the unit as you record, move it slowly.
≥ Try to hold the unit as steady as possible when recording while riding in a vehicle or 

walking.



A

 appears.