Panasonic DMC-LX100 Manual De Usuario

Descargar
Página de 332
185
SQW0021
Stabilizer, Zoom and Flash
Taking pictures using the flash (supplied)
2
Set the menu
 → 
 [Rec] → [Flash] → [Wireless]
3
Press     to select [ON] and press [MENU/SET]
 •When [Wireless] is set to [ON], [WL] will appear with the flash icon on the recording screen.
 •To perform detailed settings for the wireless flash, perform the following settings from the [Flash].
4
Press     to select [Wireless Channel] and press 
[MENU/SET]
Firing Mode
Flash output
Luminosity ratio
5
Press     to select the channel and press [MENU/SET]
 •Select the same channel as the channel set for the wireless flash 
in step 
1
.
6
Press     to select [Wireless Setup] and press 
[MENU/SET]
7
Use     to select the item and press [MENU/SET]
 •Press the [DISP.] button to perform a test firing.
[External 
Flash]
[Firing 
Mode]
[TTL]:  The camera automatically sets the flash output.
[AUTO]
*
:  Sets the flash output using an external flash.
[MANUAL]:  Manually sets the flash ratio of an external flash.
[OFF]: An external flash fires only for a communication light emission.
[Flash 
Adjust.]
Adjusts the flash output of an external flash manually when [Firing 
Mode] is set to [TTL].
[Manual 
Flash 
Adjust.]
Sets the flash ratio of an external flash when [Firing Mode] is set to 
[MANUAL].
 •You can set the flash ratio from [1/1] (flash firing full power) to [1/64] 
in 1/3 steps.
[A Group]/
[B Group]/
[C Group]
[Firing 
Mode]
[TTL]:  The camera automatically sets the wireless flash output.
[AUTO]:  Sets the flash output using the wireless flash.
[MANUAL]: Manually sets the flash ratio of the wireless flash.
[OFF]:  The wireless flashes of the set group do not fire.
[Flash 
Adjust.]
Adjusts the flash output of the wireless flash manually when [Firing 
Mode] is set to [TTL].
[Manual 
Flash 
Adjust.]
Sets the flash ratio of the wireless flash when [Firing Mode] is set to 
[MANUAL].
 •You can set the flash ratio from [1/1] (flash firing full power) to [1/64] 
in 1/3 steps.
*
  When the flash (supplied) is attached to this unit, you cannot perform these settings.