Panasonic SV-AV50 Manual De Usuario
56
ª About the LCD Monitor
≥In a place with drastic temperature
changes, condensation may form on the
LCD monitor. Wipe it with the cleaning
cloth (supplied).
LCD monitor. Wipe it with the cleaning
cloth (supplied).
≥Do not push the LCD monitor forcefully. It
may cause unevenness and malfunctions
to the monitor.
to the monitor.
≥When the lens is aimed at a subject with
high contrast, the picture may look uneven
or after images may appear on the LCD
monitor. This is not a malfunction.
or after images may appear on the LCD
monitor. This is not a malfunction.
≥If this unit is extremely cold when you turn
the power on, the image on the LCD
monitor is slightly darker than usual at
first. However, as the internal temperature
increases, it goes back to the normal
brightness.
monitor is slightly darker than usual at
first. However, as the internal temperature
increases, it goes back to the normal
brightness.
ª About the Lens
≥Do not touch the lens. Wipe the SD Video
Camera with the cleaning cloth (supplied)
when the lens becomes unclean. Do not
wipe stains on the lens with sharp objects.
The lens may be scratched or broken.
when the lens becomes unclean. Do not
wipe stains on the lens with sharp objects.
The lens may be scratched or broken.
≥When the Lens is Fogged Up, turn off the
SD Video Camera and leave the SD Video
Camera in this condition for approx.
1 hour. When the lens temperature
becomes close to the ambient
temperature, the fog disappears naturally.
Camera in this condition for approx.
1 hour. When the lens temperature
becomes close to the ambient
temperature, the fog disappears naturally.
ª About the Memory Card
When the power/card access lamp is
Blinking (when the card is being read),
do not remove the card, turn the power
off, or subject it to vibration or impact.
Do not leave the card in places where
there is high temperature or direct
sunlight, or where electromagnetic
waves or static electricity are easily
generated. Do not bend, drop, or subject
it to strong vibration.
≥If the above precautions are not taken, the
Blinking (when the card is being read),
do not remove the card, turn the power
off, or subject it to vibration or impact.
Do not leave the card in places where
there is high temperature or direct
sunlight, or where electromagnetic
waves or static electricity are easily
generated. Do not bend, drop, or subject
it to strong vibration.
≥If the above precautions are not taken, the
card or the recorded content may be
damaged.
damaged.
Be sure to pull out and store the card
after use.
≥Keep the card in the storage bag to store
after use.
≥Keep the card in the storage bag to store
or carry the card around.
≥Do not allow dirt, dust or water to enter the
terminals on the back of the card. Do not
touch it with your fingers.
touch it with your fingers.
≥The SD Memory Card
has a write-protect
switch. Sliding the
switch to [LOCK]
prevents the contents in
the Memory Card from
deleting accidentally.
switch. Sliding the
switch to [LOCK]
prevents the contents in
the Memory Card from
deleting accidentally.
≥As a result of improper operations,
recorded data may be damaged or
erased. We are not responsible for the
loss caused by the erasure of the
recording data.
erased. We are not responsible for the
loss caused by the erasure of the
recording data.
ª State of Power Lamp while
charging
The Power Lamp flashes while charging.
(Flashes approx. every 4 seconds when
charging is normal (flashes on approx.
2 seconds and off approx. 2 seconds).)
When the Power Lamps flashes more
quickly or slowly (or turns off), some
abnormality may have occurred.
The flashing speed suggests the following
states.
(Flashes approx. every 4 seconds when
charging is normal (flashes on approx.
2 seconds and off approx. 2 seconds).)
When the Power Lamps flashes more
quickly or slowly (or turns off), some
abnormality may have occurred.
The flashing speed suggests the following
states.
Extremely high precision technology is
employed to produce the LCD Monitor
screen featuring a total of approximately
117,600 pixels. The result is more than
99.99% effective pixels with a mere
0.01% of the pixels inactive or always lit.
However, this is not a malfunction and
does not affect the recorded picture.
employed to produce the LCD Monitor
screen featuring a total of approximately
117,600 pixels. The result is more than
99.99% effective pixels with a mere
0.01% of the pixels inactive or always lit.
However, this is not a malfunction and
does not affect the recorded picture.
AV50PP_ENG.book 56 ページ ２００３年１１月２６日 水曜日 午後３時１７分