Sony DXC-190 Manual De Usuario

4-6

DXC-190

1 Press the step forward button of the commander once.

The mode indicator will display “2D”.

2 Keep the lens iris at 4-4-5 2.
3 Press the data change button to ensure that the

measured voltage is within the specified value range.

1 Press the step forward button of the commander once.

The mode indicator will display “50”.

2 Remove the ND filter.  Adjust the lens iris so that the

VIDEO-OUT image level is set at 65 

±

3 IRE.

1 Press the step forward button of the commander once.

The mode indicator will display “5C”.

2 Install the ND filter (6.25 %).

* Keep the lens iris at 4-4-6 .

3 Press the data change button to ensure that the

measured voltage is within the specified value range.

3 Alternately switch the mode between “50” and “51” by

pressing the MODE  DISPLAY  CHANGE button, and

while doing so, press the data change button so that the
white bright spot is placed over the origin of the vector-

scope.

IRIS-OUT

Image Level

The white bright spot moves 
in this direction when the mode 
indication is "50".

The white bright spot 
moves in this direction 
when the mode 
indication is "51".

All white pattern

Image level of VIDEO OUT

Waveform Monitor

50

65 

±

3 IRE

All white pattern

Interface Tool TP5 (IRIS OUT)

Oscilloscope (AC 100 mV, 10 

u

s)

2D

700 

±

40 mV

All white pattern

 VIDEO OUT image level

Waveform Monitor

5C

65 

±

3 IRE

All white pattern

 VIDEO OUT white bright spot

Vectorscope

50, 51

The white bright spot is placed
over the origin of the vectorscope.