Sony DCR-DVD703E Manual De Usuario
58
DCR-DVD92E/DVD202E/DVD203E/DVD403E/DVD602E/DVD653E/DVD703E/
DVD803E 2-587-623-11 (1)
AUTO SHUTTER
Automatically activates the electronic
shutter to adjust the shutter speed when
recording in bright conditions if you set it
to [ON] (the default setting).
shutter to adjust the shutter speed when
recording in bright conditions if you set it
to [ON] (the default setting).
SPOT FOCUS
You can select and adjust the focal point to
aim it at a subject not located in the center
of the screen.
aim it at a subject not located in the center
of the screen.
Touch the subject on the screen.
Touch [END].
appears.
To adjust the focus automatically, touch
[AUTO]
[AUTO]
[END].
•
If you set [SPOT FOCUS], [FOCUS] is
automatically set to [MANUAL].
• The setting returns to [AUTO] when you have
the power source disconnected from your
camcorder for more than 5 minutes.
camcorder for more than 5 minutes.
FOCUS
You can adjust the focus manually. Select
this when you want to focus on a certain
subject intentionally.
this when you want to focus on a certain
subject intentionally.
Touch [MANUAL].
appears.
Touch
(focusing on close subjects)/
(focusing on distant subjects) to
sharpen the focus. appears when the
focus cannot be adjusted any closer, and
appears when the focus cannot be adjusted
farther away.
focus cannot be adjusted any closer, and
appears when the focus cannot be adjusted
farther away.
Touch
.
To adjust the focus automatically, touch
[AUTO]
[AUTO]
in step
.
• It is easier to focus on the subject by moving
the power zoom lever towards T (telephoto) to
adjust the focus, then towards W (wide angle)
to adjust the zoom for recording. When you
want to record a subject at close range, move
the power zoom lever to W (wide angle), then
adjust the focus.
adjust the focus, then towards W (wide angle)
to adjust the zoom for recording. When you
want to record a subject at close range, move
the power zoom lever to W (wide angle), then
adjust the focus.
•
The minimum distance required between
your camcorder and the subject to get a sharp
focus is about 1 cm (about 1/2 inch) for wide
angle and about 80 cm (about 2 5/8 feet) for
telephoto.
focus is about 1 cm (about 1/2 inch) for wide
angle and about 80 cm (about 2 5/8 feet) for
telephoto.
• The setting returns to [AUTO] when you have
the power source disconnected from your
camcorder for more than 5 minutes.
camcorder for more than 5 minutes.
FLASH SET
You can set this function when you use the
built-in flash (DCR-DVD403E/DVD803E)
or an external flash (optional) that is
compatible with your camcorder.
built-in flash (DCR-DVD403E/DVD803E)
or an external flash (optional) that is
compatible with your camcorder.
FLASH MODE (Except for DCR-
DVD403E/DVD803E)
ON
Flashes every time.
ON
Flashes to reduce the red-eye phenomenon.
AUTO
Flashes automatically.
AUTO
Flashes automatically to reduce the red-
eye phenomenon.
eye phenomenon.
•
If the flash is not capable of preventing the red-
eye phenomenon, you can select only [ON] or
[AUTO].
[AUTO].
• The setting returns to [ON] when you have
the power source disconnected from your
camcorder for more than 5 minutes.
camcorder for more than 5 minutes.
FLASH LEVEL
HIGH ( )
Makes the flash level higher.
CAMERA SET (continued)