Sony DCR-DVD7E Manual De Usuario

Descargar
Página de 112
54
DCR-DVD7E 
2-597-463-11(1)
•  Redo the [ONE PUSH] procedure if you change 
the [PROGRAM AE] settings, or bring your 
camcorder outdoors from inside the house, or 
vice versa when [ONE PUSH] is set to on.
•  Set [WHITE BAL.] to [AUTO] or [ONE 
PUSH] under white or cool white fluorescent 
lamps.
•  The setting returns to [AUTO] when you have 
the power source disconnected from your 
camcorder for more than 5 minutes.
AUTO SHUTTER
Automatically activates the electronic 
shutter to adjust the shutter speed when 
recording in bright conditions if you set it 
to [ON] (the default setting).
SPOT FOCUS
You can select and adjust the focal point to 
aim it at a subject not located in the center 
of the screen.
  Touch the subject on the screen.
 
 appears.
  Touch [END].
To adjust the focus automatically, touch 
[AUTO]
[END].
  If you set [SPOT FOCUS], [FOCUS] is 
automatically set to [MANUAL].
  The setting returns to [AUTO] when you have 
the power source disconnected from your 
camcorder for more than 5 minutes.
FOCUS
You can adjust the focus manually. Select 
this when you want to focus on a certain 
subject intentionally.
 Touch [MANUAL].
 
 appears.
  Touch 
 (focusing on close subjects)/
 (focusing on distant subjects) to 
sharpen the focus.   appears when the 
focus cannot be adjusted any closer, and     
appears when the focus cannot be adjusted 
farther away.
  Touch 
.
To adjust the focus automatically, touch 
[AUTO]
 in step 
.
 It is easier to focus on the subject by moving 
the power zoom lever towards T (telephoto) to 
adjust the focus, then towards W (wide angle) 
to adjust the zoom for recording. When you 
want to record a subject at close range, move 
the power zoom lever to W (wide angle), then 
adjust the focus.
  The minimum distance required between 
your camcorder and the subject to get a sharp 
focus is about 1 cm (about 1/2 inch) for wide 
angle and about 80 cm (about 2 5/8 feet) for 
telephoto.
  The setting returns to [AUTO] when you have 
the power source disconnected from your 
camcorder for more than 5 minutes.
COLOR SLOW S 
 
(Color Slow Shutter)
When you set [COLOR SLOW S] to [ON], 
you can record an image brighter in color 
even in dark places.
 and [COLOR SLOW SHUTTER] flash 
on the screen.
To cancel [COLOR SLOW S], touch 
[OFF].
CAMERA SET (continued)