Sony DCR-HC94E Manual De Usuario
10
E:\SONY\2659814111\01GB02GET_E.fm
DCR-HC36E/HC44E/HC46E/HC94E/HC96E
2-659-814-11(1)
For DCR-HC36E:
4
For DCR-HC44E/HC46E/HC94E/
HC96E:
Connect the mains lead to the AC
Adaptor and the wall socket.
Insert the camcorder into the
Handycam Station securely, all
the way to the bottom.
HC96E:
Connect the mains lead to the AC
Adaptor and the wall socket.
Insert the camcorder into the
Handycam Station securely, all
the way to the bottom.
DCR-HC94E/HC96E:
DCR-HC44E/HC46E:
The CHG (charge) lamp lights up and
charging starts.
charging starts.
• When inserting the camcorder into the
Handycam Station, close the DC IN jack
cover.
cover.
For DCR-HC36E:
Connect the mains lead to the AC
Adaptor and the wall socket.
Connect the mains lead to the AC
Adaptor and the wall socket.
The CHG (charge) lamp lights up and
charging starts.
charging starts.
5
The CHG (charge) lamp turns off
when the battery is fully charged.
Disconnect the AC Adaptor from
the DC IN jack.
when the battery is fully charged.
Disconnect the AC Adaptor from
the DC IN jack.
For DCR-HC44E/HC46E/HC94E/
HC96E:
Disconnect the AC Adaptor from the
DC IN jack holding both the Handycam
Station and the DC plug.
HC96E:
Disconnect the AC Adaptor from the
DC IN jack holding both the Handycam
Station and the DC plug.
For DCR-HC44E/HC46E/HC94E/HC96E:
To charge the battery pack using only
the AC Adaptor
To charge the battery pack using only
the AC Adaptor
Turn off the power, then connect the AC
Adaptor to the DC IN jack on your
camcorder.
Adaptor to the DC IN jack on your
camcorder.
• You can operate your camcorder connected to a
power source such as a wall socket as shown in
the illustration. The battery pack will not lose its
charge in this case.
the illustration. The battery pack will not lose its
charge in this case.
DC IN jack
With the v mark
facing to the LCD
screen
facing to the LCD
screen
/CHG
(charge) lamp
CHG (charge) lamp
CHG (charge) lamp
Step2: Charging the battery pack (Continued)