Sony 300PF Manual De Usuario
Chapter 1 Overview
16
Chapter 1
Overview
This indicates the battery capacity and voltage as shown below.
Change menu setting for the battery you are using.
Change menu setting for the battery you are using.
For menu settings, see “Selecting Battery Capacity Indication
Menu 206” (page
94).
Battery voltage
Indication
BP-L40/L60/L60A/
NP-1B/BP-90A
L90/L90A
BATT E[
pppppp
]F
15.0 V or more
12.5 V or more
BATT E[
ppppp
p
]F
14.0 to 15.0 V
12.0 to 12.5 V
BATT E[
pppp
pp
]F
13.0 to 14.0 V
11.75 to 12.0 V
BATT E[
ppp
ppp
]F
12.0 to 13.0 V
11.5 to 11.75 V
BATT E[
pp
pppp
]F
11.3 to 12.0 V
11.3 to 11.5 V
BATT E[
pp
pppp
]F (blinking)
1)
11.25 to 11.3 V
11.25 to 11.3 V
BATT E[
p
ppppp
]F (blinking)
11.0 to 11.25 V
11.0 to 11.25 V
BATT E[
pppppp
]F (blinking)
11.0 V or less
11.0 V or less
1)Replace the battery pack when this indication appears.
Location and Function of Parts
j
Lithium backup battery warning
Appears when the voltage of the internal lithium backup battery (CR2032) is low. If this
indication appears, replace the lithium backup battery immediately.
indication appears, replace the lithium backup battery immediately.
For further information about replacing lithium battery, see “Inserting and Replacing
the Lithium Battery” (page 31).
the Lithium Battery” (page 31).
k
DVCAM indication
Disappears when the cassette being played back is not for DVCAM format.
l
Cassette memory indication
Appears when using a cassette with cassette memory.
m
Audio mode indications
These show audio recording/playback mode.
Fs32k: 4-channel mode (32kHz sampling frequency)
Fs48k: 2-channel mode (48kHz sampling frequency)
For further information about selecting audio recording mode, see “Selecting Audio
Recording Mode
Recording Mode
Menu 212” (page 97).
n
Warning indications
Include the following.
RF: Appears when the video heads are clogged, or when there is a fault in the
recording system.
SERVO: Appears when the servo lock is not functioning.
HUMID: Appears when there is condensation on the drum.
SLACK: Appears when there is a tape winding fault.
For measures against warning indications, see “Warning System” (page 115).
o
Service indication
Appears during maintenance on VCR menu operations (page 92). It does not appear
during normal operation.
during normal operation.
p
Battery capacity indication
(Continued)