Sony 510P Manual De Usuario

Cha

p

te

r 4  

 Sc

en
e Sele

c

tion

69

4-2 Basic Operations

Select the desired clip list (except for NEW FILE), and 
press the SEL/SET dial or the MENU knob.

The message “LOAD OK? YES 

b NO” appears.

Turn the SEL/SET dial or the MENU knob to move the 
b mark to “YES” and press the dial/knob.

The selected clip list is loaded into the current clip list.

Hold down the SHIFT button and press the SUB CLIP 
button.

CLIP menu operations end.

Proceed as follows.

Press the SUB CLIP button, turning on the indicator.

Press the THUMBNAIL button, turning on the 
indicator.

Thumbnails of the sub clips within the current clip list 
appear.

• If the MENU ON/OFF switch is set to ON, set it to 

OFF and press the THUMBNAIL button.

• If you set the MENU ON/OFF to ON during 

thumbnail display, thumbnail display is cancelled 
and replaced with menu display.

Press the THUMBNAIL button, turning off the 
indicator.

Use the SEL/SET dial or the MENU knob to select the 
desired sub clip.

Hold down the SHIFT button, and press the SEL/SET 
dial.

The sub clip operation menu appears.

To return to the thumbnail display without moving 
the sub clip
Do either of the following.
• Use the SEL/SET dial or the MENU knob to select 

EXIT, and press the dial/knob.

• Press the RESET button.

Use the SEL/SET dial or the MENU knob to select 
MOVE, and press the dial/ knob.

The sub clip movement screen appears. The sub clip 
selected in step 3 appears surrounded by a frame.

To escape from the sub clip movement screen to the 
previous screen
Press the RESET button.

     CLIP LIST LOAO  ESC

 E0001 04/08/08 21:57

 E0002 04/08/24 11:15

 E0003 04/08/25 15:30

 E0004 NEW FILE

 E0005 NEW FILE

 E0006 NEW FILE

 E0007 NEW FILE

 E0008 NEW FILE

 E0009 NEW FILE

 E0010 NEW FILE

This shows that third sub clip is moved 
to the position of eighth sub clip.

Cursor showing the position to which 
the selected sub clip is moved