Samsung SCD 5000 Manual De Usuario

✤

This feature enables you to record onto the MEMORY STICK.

1. Check whether the MEMORY STICK has been inserted into the device. If it is not in the

device, insert it into the slot.

2. Set the device to CAMCORDER and set the power switch to REC mode.

3. Press the MENU button.

■

The menu list will appear.

4. Turn the MENU DIAL to highlight CAMCORDER and press the MENU DIAL.

5. Select RECORD SET and press the MENU DIAL to enter the sub-menu.

6. Select REC SELECT from the sub-menu and press the MENU DIAL.

■

The REC SELECT toggles between TAPE and MEMORY with each press of the MENU
DIAL. Select MEMORY.

7. Press the START/STOP button, The images which are captured are recorded as a moving

picture MPEG4 type file onto the MEMORY STICK.(Up to 20 seconds)

■

You can record a camera still image onto the Memory Stick by pressing the Photo button
instead the START/STOP button.

8. Press the START/STOP button to stop the recording.

Notes

■

Before using the MPEG REC function, check whether the MEMORY STICK has been inserted into the camcorder.

■

Moving pictures can be made in two sizes, 160X120 or 320X240 (Pixels).

■

Noise can be generated in LCD or Monitor at the time of record. 
This noise is not recorded on Memory Stick.

CAMCORDER  REC  MODE

INITIAL

RECORD  SET
PLAY  SET

CAMCORDER
CAMERA
MEMORY
VIEWER

CAMCORDER  REC  MODE

CAMCORDER SET

RECORD  SET
PLAY  SET

CAMCORDER  REC  MODE

CAMCORDER SET
  RECORD  SET

     REC  SELECT
     REC  MODE
     EIS
     D. ZOOM
     PROGRAM  AE
     WHT. BALANCE

TAPE

SP

00655B SCD5000 (070~109)  6/11/03 2:21 PM  Page 106