Samsung SMX-C20LN Manual De Usuario

Descargar
Página de 125
ZOOMING IN AND OUT
You can zoom with the zoom lever or the Control (W/T) button on the LCD panel.
Zoom magnifi cation over 10x uses digital image processing, and is therefore called digital 
zoom. Digital zooming can increase image size up to 1200x. 
Set "Digital Zoom" to "On." 
²page 55

W: Wide-angle
T: Telephoto
To zoom out 
Slide the Zoom lever towards W (wide-angle). 
(Or  press the Control button (
) on the LCD 
panel.)
To zoom in
Slide the Zoom lever towards T (telephoto). 
(Or  press the Control button (
) on the LCD 
panel.)
OK
OK
The minimum possible distance between camcorder and subject while maintaining sharp focus is 
about 5cm (about 1.96 inch) for wide-angle and 1m (about 39.4 inch) for telephoto.
Zooming during a recording may cause the camcorder to record the sound of the zoom lever or 
zoom button.
Optical zoom preserves image quality, but during digital zoom, the image quality may suffer.
Fast zooming or zooming in on a far subject may cause slow focus. In this case, use "Manual 
Focus."
 
²page 51
When you do hand held recording, we recommend you use "Anti-Shake (HDIS)" if you zoom in 
on the subject. 
²page 52
Frequent use of the zoom function consumes more power.

When using the zoom function, you can decrease its speed by moving the Zoom (W/T) lever slowly.
Moving it quickly increases the zoom speed. However, if you use the Zoom (W/T) button on the display,
you cannot adjust the zoom speed.
Tip
Use the zoom function for close-up or wide-angle 
recording. This camcorder allows you to record
using 10x optical power zoom and 1200x digital
zoom.
OK
W
T
W
T
W
T
39