Samsung BD-J7500 Manual De Usuario

  English

04
Settings

 

Ğ

Wired - Manual

If you have a static IP address or the Automatic 

procedure does not work, you'll need to set the 

Network Settings values manually.

Follow Steps 1 and 2 in Wired - Automatic, and 

then follow these steps:
1.  Select Network Status. The product 

searches for a network, and then displays the 

connection failed message.

2.  On the bottom of the screen, select IP 

Settings, and then press the v button.  

The IP Settings screen appears.

3.  Select the IP Settings field, and then press 

the v button.

4.  Select Enter manually in the IP Settings 

field, and then press the v button.

5.  Select a parameter to enter (IP Address, for 

example), and then press the v button.  

Use the number keypad on your remote 

control to enter the numbers for the 

parameter. You can also enter numbers using 

the ▲▼ buttons. Use the ◄► buttons on 

the remote control to move from entry field 

to entry field within a parameter. When done 

with one parameter, press the v button.

6.  Press the ▲ or ▼ button to move to another 

parameter, and then enter the numbers for 

that parameter following the instructions in 

Step 5. 

7.  Repeat Steps 5 and 6 until you have filled in 

all parameters.

 |NOTE |

 

You can get the Network parameters from your Internet 

provider.

8.  When finished entering all the parameters, 

select OK, and then press the v button. 

The product verifies the network connection 

and then connects to the network.

Wireless Network

You can set up a wireless network connection in 

four ways: 

 - Wireless Automatic 

 - Wireless Manual 

 - WPS(PBC)

 - WPS PIN

When you configure the wireless network 

connection, any wireless network devices currently 

connected through the product or, if applicable, 

the product's current wired connection, will be 

disconnected.

 

Ğ

Wireless - Automatic

1.  In the Home screen, select Settings, and 

then press the v button.

2.  Select Network, and then press the v 

button.

3.  Select Network Settings, and then press the 

 button.

4.  Select Wireless in the Network Settings 

screen, and then press the v button. The 

product searches for and then displays a list 

of the available networks.

Network Settings

Select your network type.

Wireless network

iptime23

iptime
solugen_edu#2

Network type

Wireless

Refresh

WPS(PBC)

You can connect your Blu- 

ray player to the internet. 

Please select which wireless 

network to use.

5.  Select the desired network, and then press 

the v button.

6.  On the Security screen, enter your network's 

Security Code or Pass Phrase. 

Enter numbers directly using the number 

buttons on your remote control. Enter letters 

by selecting a letter with an arrow button, and 

then pressing v button.