Bontrager Race X Lite Manual De Propietario



The width of the arm pad holders can be customized to suit your 

body type and riding style.

1. Insert two arm pad holder screws (J) through the desired 

holes of the left and right arm pad holders (K) and into 

the pad width adjusters (L). 

2. Tighten each arm pad holder screw to 30 lb•in (3.4 N•m). 

3. Repeat on the second arm pad holder. 

4. Place the arm pads on the hook-and-loop fasteners of the 

arm pad holders.

If you wish to install bar end shift levers into the tip of the Race 

X Lite® extension tubes (A), slide the control cables and housing 

through the cable guide plug (N). Do not drill or cut the extension 

tubes. Tighten the shift lever mounting bolt until the shift lever is 

firmly in place. 

Re-check all fasteners for tightness after the first use of the aerobar 

and periodically thereafter to insure secure attachment of the aerobar.