Uniden DECT3181 Manual De Usuario

adapter for the charger. See the separate DRX312 or DWX317 user

guide that was packaged with your phone.

Plug the other end of each adapter into a standard 120V AC power
outlet.
Place one handset in the base and the other(s) in the charger(s) with
the display(s) facing forward. The display on the handset should light
up; if it doesn’t, reseat the handset or try plugging the AC adapter
into a different outlet.

Charge all handsets completely (about 15 hours) before using
them.

Connect the telephone cord

Connect the

TEL LinE

jack to a standard telephone wall jack.

Test the connection

Pick up the handset from the cradle and press

TaLk/fLash

. You

should hear a dial tone, and the display should say Talk.

If you don't hear a dial tone, try checking the connection between

the base and the phone jack.

Make a quick test call. (Press

End

to hang up.)

If the tone doesn’t stop when you dial, try changing to pulse dialing

mode (see page 36).
If there's a lot of noise or static on the call, see page 35 for tips on

avoiding interference.

Test any accessory handsets the same way. If you can’t get a dial
tone or the handset display says Unavailable, try resetting the
handset (see page 37).

Setting Up the CellLink™ Bluetooth™ Connection

The new DECT3181 with CellLink technology can connect with mobile
phones that support the Bluetooth V2.0 handsfree profile.
Visit Uniden.com or contact customer service for a detailed list of tested
mobile phones.



