JVC LYT2232-002A Manual De Usuario
17
A
Setup the camera.
z For models equipped with light, turn off the
z For models equipped with light, turn off the
light.
z Open the lens cover.
z Set to the shooting mode (video/still
z Set to the shooting mode (video/still
image).
¹ Even when the shooting mode is set to
“video”, still images can be captured by
pressing the still image lever during video
recording.
pressing the still image lever during video
recording.
z It is recommended to set to the auto
shooting mode.
z Insert the battery and the microSD/
microSDHC card or SD/SDHC card
beforehand if needed.
beforehand if needed.
z To turn off the camera, press and hold the
power button for more than 2 seconds.
B
Insert the drying agent at the back of the
base.
base.
C
Attach the base to the bottom of the
camera.
z Align the tripod screw hole at the bottom of
camera.
z Align the tripod screw hole at the bottom of
your camera with the screw of the base,
and tighten the screw.
and tighten the screw.
z The camera turns on automatically when the
LCD monitor is opened. To turn off the camera,
press and hold the power button for more than
2 seconds.
press and hold the power button for more than
2 seconds.
D
Fold the grip belt.
z Make sure the grip belt is not caught
z Make sure the grip belt is not caught
between the marine case when sealing.
E
Open the marine case.
z If it is difficult to open buckles, use the
z If it is difficult to open buckles, use the
small hexagonal wrench (buckle opener).
F
Attach the power button cap.
(Not required for GZ-HM545 to GZ-HM570.)
z Fit the hollow of the power button cap to
(Not required for GZ-HM545 to GZ-HM570.)
z Fit the hollow of the power button cap to
the protrusion of the power button on the
case.
case.
G
Insert the camera into the marine case.
z Align the base attachment groove with the
z Align the base attachment groove with the
base to insert.
H
Adjust the angle of the LCD monitor.
z The LCD monitor can be tilt upwards to a
z The LCD monitor can be tilt upwards to a
maximum angle of 30 degrees.
Attaching the Marine Case to the
Camera
Camera
Caution
1
2 Catch
Drying agent
Pass underneath
2
1
Tighten the screw
Open up the LCD monitor
Small hexagonal wrench
(Buckle opener)
(Buckle opener)
Power button cap
Base attachment groove
Base
Marine case internal base
WR-MG270_EN.book Page 17 Wednesday, March 24, 2010 1:36 PM