Canon A1 Manual De Usuario
Solution
Cause of error
•
Open the delivery section cover (2) of
the upstream trimmer.
the upstream trimmer.
•
Open the top cover (1).
•
Open the A and F2 transport unit,
and remove the jammed booklet.
and remove the jammed booklet.
•
Reposition the A and F2 transport
unit, and close the top cover (1) and
the delivery section cover (2) to restart
the printing.
unit, and close the top cover (1) and
the delivery section cover (2) to restart
the printing.
A booklet jam has occurred at the en-
trance of the two-knife trim section.
trance of the two-knife trim section.
•
Open the top cover (1).
•
Open the F2 transport unit and re-
move the jammed booklet.
move the jammed booklet.
•
Reposition the F2 transport unit and
close the top cover (1) to restart the
printing.
close the top cover (1) to restart the
printing.
A booklet jam has occurred in the two-
knife trim section.
knife trim section.
•
Open the top cover (1).
•
Open the F2 transport unit and re-
move the jammed booklet.
move the jammed booklet.
•
If necessary, also hold the E handle
and lift the conveyor.
and lift the conveyor.
•
Reposition the E and F2 transport
unit, and close the top cover (1)) to
restart printing.
unit, and close the top cover (1)) to
restart printing.
A booklet jam has occurred at the exit of
the two-knife trim section.
the two-knife trim section.
* If the operator panel displays the message 'Empty the two-knife trimmer waste box.'
while the delivery tray is not full, then trim waste may block the sensor.
while the delivery tray is not full, then trim waste may block the sensor.
Chapter 4 - Troubleshooting
26
Overview of possible errors