Toshiba BDK2300KU Manual De Usuario

35

The settings in the Audio menu will configure the Blu-ray Disc™/DVD player’s digital audio 
outputs (HDMI

®

 or Coaxial).

1 In the main Settings menu, press the (

) arrow buttons to select Audio, and then press the 

OK button.

2 Press the (

) arrow buttons to select an option, and then press the OK button.

3 Use the (

) arrow buttons to select the desired audio setting, and then press the OK 

button to confirm.

4 Press the ( ) arrow button to return to the previous menu.

When you connect an audio system to the COAXIAL DIGITAL output jack (see “Connecting to 
a digital amplifier/AV receiver” on page 15) the options are:

❖

Bitstream: Selects Bitstream output if your receiver SPDIF (Coax) IN supports Dolby

®

 or 

DTS

®

 or PCM audio signal.

❖

PCM: Selects PCM output if your receiver SPDIF (Coax) IN only supports PCM stereo 
audio signal.

❖

Re-encode: Selects Re-encode output if your receiver SPDIF (Coax) IN supports Dolby

®

 

or DTS

®

 and you want to hear both PIP audio and the movie audio on Blu-ray™ video.

❖

Off: No audio will be output via COAXIAL DIGITAL output jack.

When you connected an HDMI

®

 device to the HDMI OUT jack (see “Connecting to a digital 

amplifier/AV receiver” on page 15). The available options are:

❖

Bitstream: Selects Bitstream output if your receiver HDMI IN supports Dolby

®

 or DTS

®

 or 

PCM audio signal.

❖

PCM: Selects PCM output if your receiver HDMI IN only supports PCM audio signal.

❖

Re-encode: Selects Re-encode if your receiver's HDMI IN supports Dolby

®

 or DTS

®

 and 

you want to hear both PIP audio and movie audio on Blu-ray™ video.

❖

Off: No audio will be output via HDMI OUT jack.

If you don’t have a surround sound receiver connected to the Blu-ray Disc™/DVD player, you 
should leave the PCM downsampling to 48 kHz, and proceed to the next setup menu item.
If you have a surround sound receiver connected to the Blu-ray Disc™/DVD player, and you 
have connected to the surround receiver via the Blu-ray Disc™/DVD player’s HDMI

®

 output, 

this setting has no effect on the audio going to the HDMI

®

 output of the player. Leave the PCM 

downsampling to 48 kHz, and proceed to the next setup menu item.

Incorrectly setting the digital audio output’s Down-Samp rate too high may result in 
unpredictable audio playback.

Dynamic Range Control means that you can allow the Blu-ray Disc™/DVD player to make the 
loud parts of a movie’s audio track quieter than they would be in the theatre, without making the 
dialog of the actors any quieter.
This would be useful, for instance, when you want to watch a movie in the evening when others 
might be sleeping.
When Dynamic Range Control is set to Off, movie soundtracks are played with the standard 
dynamic range. When movie soundtracks are played at low volume or from smaller speakers, 
you can set Dynamic Range Control to On. Your player applies appropriate compression to make 
low-level content more intelligible and prevent dramatic passages from getting too loud.
Selecting the “Auto” option turns on the Dynamic Range Control for all Blu-ray Disc™ movie 
soundtracks except Dolby

®

 TrueHD. If you have selected a Dolby

®

 TrueHD track on the Blu-ray