ICOM IC-M504 Manual De Usuario

55

8

■ Set mode programming

Set mode is used to change the conditions of the transceiver’s
functions: Scan type, Scan resume timer, Weather alert,
Dual/Tri-watch, Beep tone, LCD contrast, Automatic foghorn fre-
quency, Radio power, Scrambler type* and Scrambler code.*

*Appears only when the optional scrambler unit is installed.

Available functions may differ depending on how they are

set by the dealer.

q Turn power OFF.
w While pushing and holding [16•9], turn power ON to enter

Set mode.

e After the display appears, release [16•9].
r Rotate  [DIAL] to select the desired item, push

[DIAL•ENTER].

t Rotate [DIAL] to select the desired condition of the item.
y Push [CLR], or rotate [DIAL] to select “E

Ex

xi

it

t,” then push

[DIAL•ENTER] to exit set mode and returns to normal op-
eration condition.

■ Set mode items

D Scan type

The transceiver has 2 scan types: Normal scan and Priority
scan. Normal scan searches all TAG channels in the selected
channel group. Priority scan searches all TAG channels in se-
quence while monitoring Channel 16.

D

D Scan resume timer

The scan resume timer can be selected as a pause (OFF) or
timer scan (ON). When OFF is selected, the scan pauses
until the signal disappears. When ON is selected, the scan
pauses 5 sec. and resumes even if a signal has been re-
ceived on any other channel than Channel 16.

--Set Mode--

Scan Timer

ON

˘OFF

<ENT˘OK>

Default: OFF

--Set Mode--

Scan Type

Priority

˘Normal

<ENT˘OK>

Default: Normal

Rotate

--Set Mode--

˘Scan Type

Scan Timer
WX Alert
Dual/Tri
Beep
Contrast
Foghorn Frequency
Radio Power
Scrambler Type
Scrambler Code
Exit