Jasco 45246 Manual De Usuario
19
Step 5. AC Power
Locate the power cable end connection. Attach the
AC adapter (labeled ‘camera’) to end of cable coming
from the camera. Plug-in AC adapter to nearest AC
outlet. Adapter must be used in a dry location. AC
power extension cables are available from the Call
Center 1-800-654-8483 or visit online at
www. jascoproducts.com
TROUBLE SHOOTING
If you are having trouble operating this product,
please consult the guide below. If you have any
questions or feel the camera system is not
operating correctly, or you simply need additional
information, please visit our web site
www.jascoproducts.com, or contact our Technical
Support Group 1-800-654-8483.
No camera picture
No camera picture
1. Check all connections. Make sure camera(s) and
receiver power LEDs are ON.
2. Ensure camera(s) and receiver are set to correct
and corresponding channel(s).
3. Make sure camera is within range of receiver (up
to 200 ft.).
4. Adjust the antenna for the camera, receiver or
both to obtain best image.