Pelco DX8000 Manual De Usuario

C623M-C (3/05)

19

The DX8000 Series DVR supports remote viewing and administration in client-server and peer-to-peer configurations. The DX8000 is compatible 
with the TCP/IP protocol and Fast Ethernet (100BaseT) network connection. Consult your network administrator before installing the DX8000 to 
avoid possible network conflicts.

For TCP/IP access, connect the DX8000 to a 100 Mbps, switched Ethernet network. Use standard Cat5 or better UTP cable with RJ-45 
connectors.

To configure the DX8000 hardware for network access:

1. Connect one end of the UTP cable to the network port on the back panel of the DX8000 as shown in Figure 9.

2. Connect the other end of the UTP cable to an available port on a standard Fast Ethernet switch.

Figure 9.  LAN/WAN Cable Connection

ROUTER

LAN/WAN
INTERNET

FAST ETHERNET SWITCH

CAT5 UTP