Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Pelco
  4. DX8000
  5. Manual De Usuario

Pelco DX8000 Manual De Usuario

Descargar
Página de 96
 
C623M-C (3/05)
7
 
Before You Begin
 
Before installing or using your DX8000 Series DVR, complete and save the information on this page.
Installing the DX8000 DVR on a network will require support from your network administrator. Contact your administrator to assist you in 
configuring the network features of the unit. Obtain and write down the following information from your network administrator:
1. A unique site name for each DVR. (Site names can be up to 32 characters and can include spaces.)
_____________________
_____________________
_____________________
_____________________
2. A unique system ID for each DVR. (System IDs must start with a letter, can be up to 15 characters long, and cannot contain spaces or 
special characters.)
_____________________
_____________________
_____________________
_____________________
3. The TCP/IP port numbers that will be used by all DX8000 servers and clients on the network.
                             
                               
                                        
        9005 (fixed)    
             13900 (fixed)     
Base Port
Upgrade Port
Emergency Agent Port
Information Port
Ping Port
(Default = 9002)
(Default = 9003)
(Default = 9004)
(Default = 9005)
(Default = 13900)
If your network is not configured for DHCP, obtain and write down the following information from your network administrator:
4. A unique IP address for each DVR. (Examples are 10.0.0.101, 10.0.0.102, 10.0.0.103, etc.)
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
5. The subnet mask for each IP address. (An example is 255.0.0.0.)
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
6. The default gateway IP address for each unit.
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
7. The Primary DNS Server IP address for each unit.
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
8. The Secondary DNS Server IP address for each unit.
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
 
NOTE:
 
  You must change the system ID of each DX8000 you connect on a network segment to avoid conflicts.
IMPORTANT:  The minimum network 
requirements for DX8000 Series DVRs 
include a switched Ethernet LAN with a 
bandwidth of 100 Mbps.