SVAT Electronics CV301-8CH Manual De Usuario

CV301-8CH

now you can see

•  Make sure your TV/monitor is on the correct video input channel. This is NOT 

channel 3. Common terms for this channel is INPUT, AV  CHANNEL, LINE 1, LINE 

2 and AUX. Please use your TV or VCR manual to correctly identify this channel

•  If your camera is connected to a VCR/DVR, make sure that it is properly 

connected to your TV/monitor

•  Check all connections to make sure they are secure and properly connected

•     Check your power supply to ensure that the camera is powered up

•  Cup your hands around the front of the camera and look at the LEDs. They 

should be glowing red. If they are not, check the power supply

•  Make sure your camera is not aimed at direct sunlight
•  Adjust the sunshade by sliding it forwards to block out excess light
•  Make sure nothing is obstructing the CDS sensor on the camera. If the CDS 

sensor is blocked, night vision mode will be active and may produce extra light 

in your camera’s picture

•  Move your camera to another location

•  If using at night, make sure your camera’s subject is no more than 15ft away 

(may vary based on amount of ambient light available)

•  If using during the day, your camera may not be getting enough light. Adjust 

the sunshade by sliding it backwards to let in more light

•  Check the brightness and contrast settings on your TV/monitor
•  If your camera is connected to a VCR/DVR, check the brightness and contrast 

settings on the VCR/DVR

•  Move your camera to another location

•  The night vision turns on automatically when light levels drop. Try the camera in 

a pitch black setting. The area that it is in may have too much light and may not 

activate the sensor

•  Cup your hands around the front of the camera and look at the LEDs. They 

should be glowing red. If they are not, check the power supply

Toll free telephone: 

Email: 

Online live web chat: 

Toll free fax: