VIVOTEK IP8364-C Manual De Usuario

 

 

The diameters of the cable holes on the rubber seal 

are shown on the right. Please properly install the 

waterproof cable gland and cables through it to obtain 

IP66 waterproof functionality. 
All units are in millimeters. The cable range for the 

Ethernet cable is 6.4 to 4.3mm, 1.6mm for DI lines. 

3

1

2

4

Silica gel

If you prefer installing a MicroSD card as onboard storage: 

1. Loosen the waterproof connector, and then remove the rubber seal, and the waterproof 

connector.

2. Loosen and open the rear cover.

3. Install a MicroSD/SDHC card. 

4. Tear down the aluminum foil vacuum bag and take out the dessicant bag. Attach the 

supplied dessicant bag to the inner side of the Network Camera. (Please replace the 

dessicant bag with a new one every time you open the rear cover.)

5. Connect an Ethernet cable and DI lines to the camera, and pass them through the 

rubber seal. 

5