Avaya 03-300430 Manual De Usuario

G700 Media Gateways (serving either as standalone port networks, or as port networks within 
an IP or a Multi-Connect system) report alarms to the primary server (either an S8300 or S8700 
Media Server) using SNMP traps. Like the primary server’s own alarms, alarms from a G700 
Media Gateway:

●

Reside in the primary server’s alarm log

●

Can be viewed using the SAT command display alarms

●

Can be viewed using the Web Interface Display Alarms option

However, the format of these displayed alarms is slightly different. Using the G700 MO’s 
Event ID #1 (the first entry in 

on page 305) as an example, a displayed G700 alarm has the following format:

n CMG 1 WRN 07/17/2002:13:45 121.1.1.2:cmgMultipleFanFault
Within the previous alarm-display string, the value:

●

“n” is a sequential alarm ID.

●

“CMG” identifies a G700 Media Gateway as the MO.

●

“1” is the event’s ID (1st column of 

This table also contains each alarm’s corresponding SNMP trap # in the 2nd column of 

on page 305. However, 

many of the MIB-defined traps have been excluded, either because:

●

A specific trap (such as, Trap #3) is the SNMP mechanism to clear an alarm logged by 
another specific trap (in this case, Trap #2).

●

The specific event indicated by a trap is not severe enough to justify an entry in the 
primary server’s alarm log.

●

A trap is defined, but not implemented.

●

A trap # is reserved for future use.

●

“WRN” is the event’s severity (3rd column of 

●

“07/17/2002:13:45“is the event’s date and time stamp.

●

“121.1.1.2“is the IP address for Telnet access to the alarmed G700 Media Gateway 
Processor (MGP).

●

“cmgMultipleFanFault” is an alarm description (4th column of