Canon WFT-E2 II Manual De Usuario
12
Turn off the camera before attaching the transmitter.
Ensure the camera battery has sufficient charge. If the charge drops below 19%, you
cannot transfer captured images or back them up to external media.
Ensure the camera battery has sufficient charge. If the charge drops below 19%, you
cannot transfer captured images or back them up to external media.
1
Open the terminal cover on the camera.
Open the extension system terminal cover and
turn it toward the bottom.
turn it toward the bottom.
2
Move the lever into the release position.
3
Attach the transmitter.
Align the attachment pin with the WFT-E2 II/IIA
mounting hole on the camera.
mounting hole on the camera.
Push the terminal firmly into the camera.
As you push the terminal into the camera, turn the
tightening screw until it stops rotating to attach the
transmitter securely.
tightening screw until it stops rotating to attach the
transmitter securely.
4
Move the lever into the locked position.
The transmitter is now attached to the camera.
The transmitter will be powered by the camera.
Removal
Turn off the camera.
Push the lever down, into the release position.
Loosen the tightening screw until it spins freely.
Pull the terminal out of the camera.
Attaching to the Camera
COP
Y