Canon WFT-E2 II Manual De Usuario

22

Using the Wizard to Establish a Connection

Next, enter the encryption key of the wireless LAN terminal. For details on the encryption key, 
refer to the device’s instruction manual.
Note that the screens displayed in steps 1 to 3 below vary depending on the authentication and 
encryption of the wireless LAN terminal.

 

The [Key index] screen is displayed only if WEP 
encryption is used by the wireless LAN terminal.

 

Turn the <5> dial to select the key index number 
specified as the access point, and then press 
<0>.

 

Select [OK] and press <0> to go to the next 
screen.

 

Turn the <5> dial to select the key format, and 
then press <0>.

 

Select [OK] and press <0> to go to the next 
screen.

 

Enter the encryption key.

 

To switch between input areas, press the <H> 
button.

 

To move the cursor, turn the <5> dial.

 

In the bottom input area, turn the <5> dial and 
press <0> to enter the encryption key.

 

If you make a mistake, press the <L> button to 
erase it.

 

When you press the <7> button to complete 
the connection with the wireless LAN terminal, the 
[Network] screen (p.25) is displayed. 

 

To return to the previous screen, press the 
<6> button. The entry is erased.

COP

Y