Lindy eSATA II Card - 2 Port, ExpressCard/34 51520 Manual De Usuario

 

- 3 - 

 

1.  Insert the card into an available ExpressCard slot. Connect eSATA cable(s) between 

the SATA port and the SATA device(s). 

2.  Windows will display the 'Found New Hardware Wizard'. Click 'Next'. 

3. Select 'Search for a suitable driver for my device (recommended)' and click 

'Next'. 

4.  Insert the driver CD in your CD-ROM/DVD drive, check 'Specify a location', 

uncheck the other boxes, click 'Next', type in E:\ (where 'E' is your CD-ROM/DVD). 

Click Browse. 

5.  Specify the driver location,   

e.g. E:\SATA Express_2Port \Sil3132 \ WinXP_2000_2003_NT, and click 

'OPEN' then 'OK'. 

6. Choose 'Silicon Image SiI 3132 SATALink Controller' and click 'OK'. 

7.  After the driver installation has completed you can follow the instructions in 

section 2.3 to verify the controller was installed correctly.   

 

   

1.  Insert the card into an available ExpressCard slot. Connect eSATA cable(s) 

between the SATA port and the SATA device(s). 

2.  Windows will display the 'Found New Hardware Wizard', 'Mass Storage 

controller'. 

3. Select 

'Install from a list or specific location (Advanced)' and click “Next”. 

Make sure the driver CD is in your CD-ROM/DVD drive. 

4. Select 

'Search for the best driver in these locations', and check 'Include this 

location in the search:'. Uncheck the other boxes. 

5. 

Type in 'E:\ ' (If your CD-ROM/DVD is E:\) then click 'Browse'. 

6.  Specify the driver location,   

e.g. E:\SATA Express_2Port \Sil3132 \ WinXP_2000_2003_NT, and click 

'OPEN' then 'OK'. 

7. 

When the wizard indicates that it has found a driver for the device, click 'Next' 

8. If 

the 

'Hardware Installation' dialog appears, click 'Continue Anyway' 

9. 

The wizard will now copy the required files to the system and start the driver. 

After starting the driver, the wizard will display a completion dialog, click 'Finish' 

to exit the wizard.