Hampton Bay 165 474 Manual De Usuario

Descargar
Página de 17
8
Finishing the Fan 
Installation
Standard Ceiling Mounting
WARNING
MAKE SURE THE TAB ON THE HANGING 
BRACKET PROPERLY SITS IN THE GROOVE IN 
THE HANGER BALL BEFORE ATTACHING THE 
CANOPY TO THE BRACKET BY TURNING THE 
HOUSING UNTIL IT DROPS INTO PLACE.
WARNING
LOCKING SLOTS OF CEILING CANOPY ARE 
PROVIDED ONLY AS AN AID TO MOUNTING. 
DO NOT LEAVE FAN ASSEMBLY UNATTENDED 
UNTIL ALL FOUR CANOPY SCREWS ARE 
ENGAGED AND FIRMLY TIGHTENED.
Slide canopy up to the ceiling as shown in Figure 
14. Make sure you place the wires safely into the 
outlet box. Secure the canopy to the hanger 
bracket with the four screws with your fan. Raise 
up canopy ring and line up the 4 tabs with the 4 
grooves on the canopy. Once lined up, slide the 
canopy ring and secure it to the canopy until snug.
Remove the fan from the hook on the hanger 
bracket. Secure the canopy to the hanger bracket 
with four screws included with your fan. (Fig. 15) 
Raise up canopy ring and line up the 4 tabs with 
the 4 grooves on the canopy. Once lined up, slide 
the canopy ring and secure it to the canopy until 
snug.
Close-to-Ceiling Mounting
Groove
Figure 14
Canopy
Outlet Box
Hanger
Bracket
Screws
Canopy
Ring
Canopy
Outlet Box
Hanger
Bracket
Screws
Canopy
Ring
Figure 15